Archive for the ‘General’ Category
Simrit Introduces Self-fusing Silicone Sinusoidal Tape; Expands Existing Product Line |
Jul 1019 |
PLYMOUTH, Mich., July 19, 2010 – Simrit, the industrial products division of Freudenberg-NOK, recently expanded its Self-fusing Silicone Tape line to include sinusoidal fiberglass reinforced tape. The company’s latest offering incorporates fiberglass strands into the tape to better control the amount of stretch for consistent thickness and dielectrics, while providing improved tear and abrasion resistance.
Compliant to numerous aerospace specifications, the line’s most common uses include supporting / sealing hot and cold air ducting, wire harness wrapping and wire bundling. The Self-fusing Silicone Tape meets the following: A-A 59163, Type I & II; MIL-I-22444C; DMS 2186 Type I & II; P.S. 17115; ASNA 5107; RMS 315; HS5215; P5384 Type II.
Simrit’s line of Self-fusing Silicone Tape is produced out of specially formulated silicone which only bonds to itself without an adhesive, allowing for clean installation and re-entry. Once contact is made, fusion begins in seconds with 100 percent cohesion complete within 24 hours (at room temperature). The fused tape then becomes an impermeable barrier against contaminating fluid and environmental ingress while providing excellent dielectric protection (in excess of 400V per 0.001” in thickness). When servicing is required, the tape can be removed easily as there is no adhesive left on the substrate. This saves time and reduces the chance of damage to any of the underlying components.
Simrit’s Self-fusing Silicone Tape line, which also includes homogeneous rectangular, triangular guideline and non-stretch formats, is ideal as an insulating material for applications requiring additional protection from environmental concerns (Ultraviolet light, ozone, fungus, salt water), chaffing, high- and low-temperatures (-55°C to 260°C), flame and fire. The entire tape line also protects against fluid splash and is compliant to Fluid Susceptibility to RTCA / DO-160F, Section 11.
The tape is produced from specially formulated silicone rubber optimizing its long operating life, superior resistance to thermal degradation, moisture, chemical attack (fuel, oil, coolant, acids, etc.) and mechanical abuse. Simrit also offers a special fluorosilicone self-fusing tape for applications that encounter prolonged contact with fuels and harsh chemicals.
Aerospace has demanding requirements for flammability and fire. Simrit has developed a Flame Retardant tape that is compliant to FAR 25.853, 25.855 and most recently a tape that can be used to achieve Fire Resistance and Fire Proof to AC20-135 / ISO 2685 (2000F for 5/15 mins resp.) “As applications and environments become more demanding, it is critical that Simrit works to address these changes with proven materials and products that fit our customers’ needs,” said Todd Blair, product development manager. “When we saw the need for an advanced self-fusing silicone tape that could meet even greater requirements such as improved tear and abrasion resistance, or greater fire protection, we applied our proven materials technology to develop these new products.”
The Simrit Division is based at Freudenberg-NOK’s headquarters in Plymouth, Mich. Freudenberg-NOK is part of the Freudenberg and NOK Group Companies, which have total annual sales of more than $7 billion. The global Freudenberg and NOK Group offers an extensive portfolio of precision-molded products for the aerospace, appliance, automotive, marine, medical, off-highway equipment, recreational vehicle and renewable energy markets. For more information, visit the Simrit website at www.simrit.com.
# # #
Editor’s Note: For high-res images of Simrit’s Self-Fusing Silicone Tape line, including its latest sinusoidal fiberglass reinforced tape, please contact Adriana Ferrari at 248-269-1122 or aferrari@bianchipr.com.
Lisa Gentile joins Simrit as Marketing Associate |
Jun 101 |
Simrit marketing is pleased to announce that Lisa Gentile has joined Simrit Americas as Marketing Associate, effective June 1, 2010. In this role she will report directly to Tim Lomax, Marketing Communications Director, and will work from the Plymouth office.
Lisa will be responsible for the development and production of all market and product literature and the drafting of customer communications. She will also function as project manager for our customer magazine, Simrit Insight, and will be the primary liaison with editors from industrial magazines. Lisa holds a bachelor’s degree in Communications Studies from the University of Michigan.
Please join Simrit in welcoming Lisa to her new role on the Simrit team!
Simrit’s Website is now in Portuguese |
May 1014 |
Simrit is proud to introduce a new language option for our North American website. To support the growing Brazilian and South American market, our website is now available in English, Spanish and Portuguese.
In order to access the Portuguese website, please use this link http://simrit.com.br/ or select “Portuguese” from the language dropdown on www.simritna.com.
Simrit Division of Freudenberg-NOK Earns Emerson Climate Technologies Quality Award |
Mar 1031 |
PLYMOUTH, Mich., March 29, 2010 – In recognition of its outstanding performance in delivery, quality and customer support, Simrit’s Troy, Ohio facility was recently awarded Emerson Climate Technologies’ Quality Award for excellence as demonstrated by a zero ppm (parts per million) defect rate during 2009. The Troy facility manufactures thermoplastic seals and bearings, and supplies sealing elements for floating seal assemblies within scroll compressors to Emerson Climate Technologies.
“It’s a great honor to be recognized by Emerson Climate Technologies for our dedication to providing superior products and services,” said Raymond Gillies, product marketing manager, Simrit. “At Simrit, we strive to offer exceptional customer service, as well as quality products that fit our customers’ needs and long-term goals.”
Simrit’s collaboration with Emerson Climate Technologies began more than 20 years ago. In 1987, the two companies jointly developed a new sealing technology that went into production in 1988. Simrit supplies scroll compressors parts to Emerson Climate Technologies that require consistent quality with minimal material variance. Due to the critical nature of these parts, all sealing and material developments go through rigorous testing before qualification.
“The quality award recognizes the Troy facility for its accomplishments in 2009 and for its business excellence. We wish all of our suppliers were at the level Simrit has attained and thank Simrit for the quality it has delivered to Emerson Climate Technologies over the years,” said Dave Proffitt, vice president of global sourcing, Emerson Climate Technologies. “Our strong business relationship creates win-win opportunities for both Emerson Climate Technologies and Simrit.”
The Simrit Division is based at Freudenberg-NOK’s headquarters in Plymouth, Mich., and is part of the Freudenberg and NOK Group, which has total annual sales of more than $12 billion. Simrit offers an extensive portfolio of sealing solutions for the aerospace, appliance, energy, heavy duty truck, industrial, marine, mobile machinery, recreational vehicle and semiconductor markets.
For more information, visit the Simrit website at www.simrit.com.
# # #
Editor’s Note: For an image of the Simrit team receiving the Emerson Award, please contact Adriana Ferrari at 248-269-1122 or aferrari@bianchipr.com. 
Simrit Launches Energy-saving MileMaker™ Seal |
Mar 1026 |
PLYMOUTH, Mich., March 22, 2010 – Offering friction-reducing and fuel-saving benefits for commercial truck and trailer customers, Simrit’s MileMaker™ seals are being globally introduced for both OE (original equipment) and aftermarket heavy duty truck and trailer wheel and axle applications. Designed and developed by Simrit – a division of global sealing specialist Freudenberg-NOK – the MileMaker seals operate with over 50 percent less torque than competitors’ seals, which can result in more than $1,000 in diesel fuel savings per commercial truck trailer combination over the life of the seal.
“Building on our many years of proven seal performance in the heavy duty industry, the new MileMaker sealing solution delivers significant energy savings and raises the performance bar for wheel seals in the heavy duty truck and trailer industry,” said Tim Guzman, sales director for heavy duty truck, Simrit. “In brief, the MileMaker sealing solution is a win-win solution for Simrit’s customers and the environment.”
Working to anticipate customer demands, Simrit designed the MileMaker sealing solution to address key issues facing the heavy duty industry, such as higher wheel end temperatures, longer service life requirements and increased durability.
Developed using a proprietary elastomer material to withstand higher operating temperatures (up to 350 F), the MileMaker seal is compatible with mineral and synthetic oils, and grease lubricants. The integrated lathed, ground and polished wear sleeve running surface reduces friction, lowers torque and promotes cooler running for the main seal lip. The advanced main lip design geometry results in low-friction performance while not sacrificing dirt exclusion capabilities.
The MileMaker seal also incorporates special dirt exclusion fins that assist with keeping contamination away from the seal. The lubed rubber OD (outer diameter) and ID (inner diameter) design eases installation force, which results in less heat generation and increased seal life, and seals any minor hubs or spindle imperfections. The seal design has low internal torque aided by an internal lubricant, which translates to lower internal heat generation, excellent wear resistance and improved fuel economy.
The Simrit Division is based at Freudenberg-NOK’s headquarters in Plymouth, Mich., and is part of the Freudenberg and NOK Group, which has total annual sales of more than $12 billion. Simrit offers an extensive portfolio of sealing solutions for the aerospace, appliance, energy, heavy duty truck, industrial, marine, mobile machinery, recreational vehicle and semiconductor markets.
For more information, visit the Simrit Web site at www.simrit.com.
# # #
Editor’s Note:
For a high-res image / information brochure of the MileMaker seal, please contact Adriana Ferrari at 248-269-1122 or aferrari@bianchipr.com.
New Microsite to Promote Lube&Seal |
Mar 1022 |
Simrit and Klüber Lubrication have created a microsite to promote the Lube&Seal package. Lube&Seal offers precise, reliable sealing systems and complementing lubricants for use in power transmission engineering including wind turbines.
